{"title":"Brey-Krause Harness Bars \u0026 Mounts","description":"\u003cp\u003eBrey-Krause harness bars, harness mounts and lap belt hardware, built chassis by chassis rather than universal.\u003c\/p\u003e\u003cp\u003eThe common mistake is bolting shoulder straps to the factory rear seat belt mounts. Those points were designed for a three-point belt at a completely different angle. A harness bar gives you an anchor at the correct height behind the seat — Brey-Krause describe the job as properly locating and supporting the shoulder harnesses relative to the driver, which is exactly the geometry problem a bar exists to solve.\u003c\/p\u003e\u003cp\u003eEverything is listed by \u003cstrong\u003eR-number\u003c\/strong\u003e and by car — the R-1410 bar for a BRZ or FR-S, the R-9005 tunnel-side lap belt anchor for aftermarket sliders. Most designs use existing holes and mounting points, and the listings state where trim modification is needed, so read the product page before ordering.\u003c\/p\u003e\u003cp\u003eThe range is deepest on Porsche, with broad coverage of BMW, Subaru and Toyota.\u003c\/p\u003e","products":[{"product_id":"brey-krause-r-9005-harness-mount-tunnel-side-lap-belt","title":"Brey Krause R-9005 Harness Mount - Tunnel-Side Lap Belt","description":"The Brey Krause Model R-9005 Tunnel Side Seat Belt Anchor is the perfect solution for adding an inboard seat belt anchor position to aftermarket seat sliders. The anchor installs underneath the slider and the kit includes a seat rail spacer for the opposing slide mechanism.\u003cbr\u003e\u003cbr\u003eAlthough designed for Porsche applications, this may fit many other builds. Please check space between seat installation and vehicle tunnel.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926170272019,"sku":"BR9005","price":110.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/9005-web.jpg?v=1749837089"},{"product_id":"brey-krause-r-1410-harness-bar-subaru-brz-scion-fr-s","title":"Brey Krause R-1410 Harness Bar - Subaru BRZ, Scion FR-S","description":"\u003cp\u003eThe Brey Krause Model R-1410 Harness Bar for the 2012-2021 Subaru BRZ (and Scion FR-S\/Toyota 86) properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Easy to install and remove, the Brey Krause R-1410 Harness Bar uses existing holes and mounting points, and includes everything needed for a proper 4-point harness set-up, including clip-in lap belt mounting points. Engineered to allow enough seat travel for the tallest of drivers. \u003cspan style=\"color: #ff2a00;\"\u003eNote\u003c\/span\u003e: Requires minor modification of vehicle trim (see additional info). \u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926170337555,"sku":"BR1410","price":748.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1410-2.jpg?v=1749837089"},{"product_id":"brey-krause-r-9004-harness-mount-extra-short-tunnel-side-lap-belt-porsche-all","title":"Brey Krause R-9004 Harness Mount - Extra Short, Tunnel-Side Lap Belt Porsche (All)","description":"The Brey Krause Model R-9004 Extra Short Tunnel-side Harness Mounts are perfect when the R-9001 Harness Mount from Brey Krause is too long. If you are still using the Factory seats in your Porsche and can't figure how to mount the inner lap belt on a 5 point racing harness, Brey Krause has the answer for you! The Brey Krause inner lap belt mounts are TIG welded, Type 304 Stainless Steel with a satin finish. They allow you to remove and install belts in seconds and will not interfere with the factory seat belt. Includes one pair for both the driver and passenger seats.\u003cbr\u003e\u003cbr\u003eNote: Outer lap belt mounts are sold separately. Porsche 944 (1985-1989) models require the R-9002 adapter kit for installation.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926170665235,"sku":"BR9004","price":110.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-9006-2-web_1_b1022b20-3a9b-4c7e-b8f5-0e3942378268.jpg?v=1749837100"},{"product_id":"brey-krause-r-1287-harness-bar-bmw-f87-m2-coupe","title":"Brey Krause R-1287 Harness Bar - BMW F87 M2 Coupe","description":"The Brey Krause R-1287 Harness Bar fits the F87 BMW M2 Coupe and properly locates and supports racing shoulder harnesses relative to the driver. The easy to install bar does not require modification to the car, and attaches to existing seat belt mounts and seat-track hardware. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Fabricated from Type 304, stainless steel and then powdercoated in durable black wrinkle-finish. The Brey Krause BMW harness mount bars are easy to install and remove, use only factory existing holes and mounting points, and will not damage the car in any way. After initial installation, the bar can be removed and reattached in about 15 minutes. This design allows enough seat travel for even the tallest drivers.\u003cbr\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926170698003,"sku":"BR1287","price":912.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1287-web.jpg?v=1749837116"},{"product_id":"brey-krause-r-1205-harness-bar-bmw-f80-m3-f30-sedan","title":"Brey Krause R-1205 Harness Bar - BMW F80 M3, F30 Sedan","description":"The Brey Krause R-1205 Harness Bar fits all F80 BMW M3 Sedans, F30 3-Series models, and properly locates and supports racing shoulder harnesses relative to the driver. The easy to install bar does not require modification to the car, and attaches to existing seat belt mounts and seat-track hardware. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Fabricated from Type 304, stainless steel and then powdercoated in durable black wrinkle-finish. The Brey Krause BMW harness mount bars are easy to install and remove, use only factory existing holes and mounting points, and will not damage the car in any way. After initial installation, the bar can be removed and reattached in about 15 minutes. This design allows enough seat travel for even the tallest drivers.\u003cbr\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926170894611,"sku":"BR1205","price":912.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1205-main-web.jpg?v=1749837112"},{"product_id":"brey-krause-r-9002-harness-mount-adapter-porsche-944-1985-89","title":"Brey Krause R-9002 Harness Mount Adapter - Porsche 944 (1985-89)","description":"\u003cp\u003eThe Brey Krause Model R-9002 Lap Belt Adapter kit is required when installing the R-9001 Brey Krause Inner Lap Belt Mount onto 1985-1989 Porsche 944's. Brey Krause Inner lap belt mounts (R-9001) are sold separately.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926173155603,"sku":"BR9002","price":20.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/9002-web.jpg?v=1749837112"},{"product_id":"brey-krause-r-9006-harness-mount-inner-lap-belt-porsche-997-987-981-991","title":"Brey Krause R-9006 Harness Mount - Inner Lap Belt, Porsche 997\/987\/981\/991","description":"The Brey Krause R-9006 Harness Mount is designed to attach to the inside\/tunnel-side factory belt mount on Porsche 997\/991\/987\/981 cars. Engineered to fit the factory sliding mechanism, this mount allows for snap-in style harnesses to be quickly installed and removed from your dual-duty street\/track car. Fabricated from TIG-welded Type 304 stainless steel with a satin finish. The R-9006 is a great compliment to the R-9052 Side Mount Adapter. \u003cbr\u003e\u003cbr\u003e  \u003cspan style=\"color:red;\"\u003eNote: \u003c\/span\u003e Porsche OEM Manual Sliders are required for complete installation and are not included. Not compatible with power sliders.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926173188371,"sku":"BR9006","price":110.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-9006-2-web.jpg?v=1749837112"},{"product_id":"brey-krause-r-9035-sub-belt-mount-porsche-964-993","title":"Brey Krause R-9035 Sub Belt Mount - Porsche 964\/993","description":"\u003cp\u003eThe Brey Krause Model R-9035 Sub Belt Mount attaches directly to the existing seat mounting location on Porsche 964 and 993 models (1989-1998) and allows the easy installation of a anti-submarine belt.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926173286675,"sku":"BR9035","price":158.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1856-brey-krause-sub-strap-mount-for-porsche-964993.jpg?v=1749837113"},{"product_id":"brey-krause-r-9001-harness-mount-tunnel-side-lap-belt-porsche-all","title":"Brey Krause R-9001 Harness Mount - Tunnel-Side Lap Belt Porsche (All)","description":"The Brey Krause Model R-9001 Tunnel Side Lap Belt Kit helps in the easy installation of harnesses in your Porsche. If you are still using the Factory seats in your Porsche and can't figure how to mount the inner lap belt on a 5 point racing harness, this is the answer for you! The Brey Krause inner lap belt mounts are TIG welded, Type 304 Stainless Steel with a satin finish. They allow you to remove and install belts in seconds and will not interfere with the factory seat belt. Includes one pair for the tunnel side of both driver and passenger seats. \u003cbr\u003e\u003cbr\u003eNote: Outer lap belt mounts are sold separately. Porsche 944 (1985-1989) models require the R-9002 adapter kit (available separately) for installation.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926173384979,"sku":"BR9001","price":110.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/9001-web.jpg?v=1749837114"},{"product_id":"brey-krause-r-9012-camera-mount-harness-truss-adapter","title":"Brey Krause R-9012 Camera Mount Harness Truss Adapter","description":"\u003cp\u003eThe Brey Krause Model R-9012 Harness Truss Adapter allows the Brey Krause R-9010 Camera Mount to attach to a Brey Krause R-1025 Harness Truss. \u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926173778195,"sku":"BR9012","price":44.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1370-brey-krause-camera-mount_e2233fe7-d293-46bb-ad80-207ec7a4d076.jpg?v=1749837138"},{"product_id":"brey-krause-r-9003-harness-mount-outer-lap-belt-mount","title":"Brey Krause R-9003 Harness Mount - Outer Lap Belt Mount","description":"\u003cp\u003eThe Brey Krause Model R-9003 Outer Lap Belt Harness Mount fits all Porsches and many other vehicles. Secure your snap-in lap belts quickly to the outside seat belt mounting point with these Brey Krause stainless steel mounts. Although designed for Porsches, they will fit many other vehicles. Fabricated from TIG-welded Type 304 stainless steel with satin finish. Allows you to remove and install belts in seconds. Will not interfere with factory seat belt. \u003cspan style=\"color: red;\"\u003eNote: \u003c\/span\u003eContains TWO Mounts for both Driver \u0026amp; Passenger Seats. Inner lap belt mounts sold separately.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926173810963,"sku":"BR9003","price":110.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/9003-web.jpg?v=1749837138"},{"product_id":"brey-krause-r-9030-sub-belt-mount-porsche-996-997-boxster-cayman","title":"Brey Krause R-9030 Sub Belt Mount - Porsche 996\/997\/Boxster\/Cayman","description":"The Brey Krause Model R-9030 Anti-Sub Strap Mount works with the R-907X series side mount brackets when installed to factory, non-power Porsche 996\/997\/Boxster\/Cayman sliders. A one-piece seat with anti-sub strap pass-through and Brey Krause R-907x Side-Mount Brackets are required to use this product. Fabricated from 1.5\" X 1\" X .125\" wall carbon steel tubing and powdercoated in durable black wrinkle-finish. Compatible with the Brey Krause Model R-2030 Fire Extinguisher Mount.\u003cbr\u003e\u003cbr\u003e  \u003cp class=\"district1\"\u003e\u003ca href=\"https:\/\/www.ogracing.com\/bk-side-mount-options\"\u003e\u003cfont color=\"red\"\u003eClick here to learn more about Brey Krause Side Mount Adapter Brackets\u003c\/font\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926174794003,"sku":"BR9030","price":158.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/98-BREY-KRAUSE-SUB-STRAP-MOUNT-FOR-PORSCHE-996-AND-BOXSTER.jpg?v=1749837136"},{"product_id":"brey-krause-r-9229-passenger-sub-belt-mount-r-922x-seat-mount","title":"Brey Krause R-9229 Passenger Sub Belt Mount - R-922x Seat Mount","description":"\u003cp\u003eThe Brey Krause Model R-9229 Passenger-Side Anti-Sub Strap Mount is designed to mount directly to Brey Krause's line of R-922x Side Mount Adapters that fit any BMW E46 3-Series model (including the M3) or BMW Z4 (E85\/E86). The stainless steel bar attaches directly to the factory\/OE slider and helps properly locate the Anti-Sub belt for optimal safety. Moves together with the slider to keep the belt properly located and at the same length, regardless of seat position.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926210248979,"sku":"BR9229","price":78.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-9228-2-web_d1a4712f-b2c3-4bbb-997c-d28d99359f53.jpg?v=1749838414"},{"product_id":"brey-krause-r-9289-harness-mount-kit-driver-lap-belt-bmw-f8x-e9x","title":"Brey Krause R-9289 Harness Mount Kit - Driver Lap Belt, BMW F8x\/E9x","description":"\u003cp\u003eThe Brey Krause Model R-9289 Lap Belt Mount fits the driver-side of all BMW F8x \u0026amp; E9x models (including the M3) and allows for the quick and easy mounting of snap-in lap belts. Will not interfere with factory seat belt. Includes 2 brackets for both the door and tunnel sides of the seat.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926210281747,"sku":"BR9289","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-9289-driver-web_70b377af-1bf8-4938-a2cb-55694c74837f.jpg?v=1749838417"},{"product_id":"brey-krause-r-9228-driver-sub-belt-mount-r-922x-seat-mount","title":"Brey Krause R-9228 Driver Sub Belt Mount - R-922x Seat Mount","description":"\u003cp\u003eThe Brey Krause Model R-9228 Driver-Side Anti-Sub Strap Mount is designed to mount directly to Brey Krause's line of R-922x Side Mount Adapters that fit any BMW E46 3-Series model (including the M3) or BMW Z4 (E85\/E86). The stainless steel bar attaches directly to the factory\/OE slider and helps properly locate the Anti-Sub belt for optimal safety. Moves together with the slider to keep the belt properly located and at the same length, regardless of seat position.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926211068179,"sku":"BR9228","price":78.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-9228-2-web.jpg?v=1749838416"},{"product_id":"brey-krause-r-9541-harness-mount-extender","title":"Brey Krause R-9541 Harness Mount Extender","description":"\u003cp\u003eThe Brey Krause Model R-9541 Seat Belt\/Harness Clip extender adds up to a 1.25\" extension to your seat belt end. Designed to be used with the Brey Krause R-9001 and R-9004 lap belt mounts.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926211887379,"sku":"BR9541","price":82.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1746-brey-krause-harness-extender.jpg?v=1749838415"},{"product_id":"brey-krause-r-9288-harness-mount-kit-passenger-lap-belt-bmw-f8x-e9x","title":"Brey Krause R-9288 Harness Mount Kit - Passenger Lap Belt, BMW F8x\/E9x","description":"\u003cp\u003eThe Brey Krause Model R-9288 Lap Belt Mount fits the driver-side of all BMW F8x \u0026amp; E9x models (including the M3) and allows for the quick and easy mounting of snap-in lap belts. Will not interfere with factory seat belt. Includes 2 brackets for both the door and tunnel sides of the seat.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926212018451,"sku":"BR9288","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-9288-pass-web.jpg?v=1749838417"},{"product_id":"brey-krause-sub-belt-mount-porsche-997-sport-seats-gt2-gt3-seats-driver-side","title":"Brey Krause Sub Belt Mount - Porsche 997 Sport Seats, GT2\/GT3 Seats, Driver Side","description":"\u003cp\u003eThe Brey Krause R-9032 Sub Strap mount fits the Driver-side Porsche 997 Optional Sport Bucket Seats, and GT2\/GT3 Seats. Allows the easy installation of a sub-strap - no drilling required! Designed specifically for the driver-side Porsche 997 Sport Bucket, and GT2\/GT3 seats, the Brey Krause Sub Strap mount bolts directly to the factory seat mounting hardware. Note: Will not fit passenger side (please see R-9034).\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926215491859,"sku":"BR9032","price":158.51,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/9032_web.jpg?v=1749838455"},{"product_id":"brey-krause-sub-belt-mount-porsche-gt3-seat","title":"Brey Krause Sub Belt Mount - Porsche GT3 Seat","description":"The Brey Krause Model R-9031 Anti-Sub Strap Mount is used when installing Porsche GT3 seats directly to the floor of Porsche 996\/997\/Boxster\/Cayman cars with the R-908X-series side mount brackets. Fabricated from 1.5\" X 1\" X .125\" wall carbon steel tubing and powdercoated in durable black wrinkle-finish. \u003cbr\u003e\u003cbr\u003e  \u003cp class=\"district1\"\u003e\u003ca href=\"https:\/\/www.ogracing.com\/bk-side-mount-options\"\u003e\u003cfont color=\"red\"\u003eClick here to learn more about Brey Krause Side Mount Adapter Brackets\u003c\/font\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926216343827,"sku":"BR9031","price":158.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-9031_web.jpg?v=1749838469"},{"product_id":"brey-krause-sub-belt-mount-r-9060-63-seat-mounts-porsche","title":"Brey Krause Sub Belt Mount - R-9060\/63 Seat Mounts (Porsche)","description":"\u003cp\u003eThe Brey Krause R-9033 Sub Strap mount attaches directly to the R-9060 \u0026amp; R-9063 Brey Krause Seat Adapters for Porsches. Allows the easy installation of a sub-strap - no drilling required! The Brey Krause R-2030 Fire Extinguisher Mount can also attach directly to this piece.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926216409363,"sku":"BR9033","price":158.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-9033_web.jpg?v=1749838470"},{"product_id":"brey-krause-sub-belt-mount-porsche-997-sport-seats-gt2-gt3-seats-passenger-side","title":"Brey Krause Sub Belt Mount - Porsche 997 Sport Seats, GT2\/GT3 Seats, Passenger Side","description":"\u003cp\u003eThe Brey Krause R-9034 Sub Strap mount fits the Passenger-side Porsche 997 Optional Sport Bucket Seats, and GT2\/GT3 Seats. Allows the easy installation of a sub-strap - no drilling required! Designed specifically for the passenger-side Porsche 997 Sport Bucket, and GT2\/GT3 seats, the Brey Krause Sub Strap mount bolts directly to the factory seat mounting hardware. Note: Will not fit driver side (please see R-9032).\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926216507667,"sku":"BR9034","price":158.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-9034_web.jpg?v=1749838470"},{"product_id":"brey-krause-r-1155-harness-bar-chevrolet-camaro-6th-gen","title":"Brey Krause R-1155 Harness Bar - Chevrolet Camaro (6th Gen)","description":"\u003cp\u003eThe Brey Krause Model R-1155 Harness Bar for the 2015 and later Chevrolet Camaro properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Easy to install and remove, the Brey Krause R-1155 Harness Bar uses existing holes and mounting points, and requires no vehicle modification. Kit includes everything needed for a proper 4-point harness set-up, while allowing enough seat travel for the tallest of drivers.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926941761811,"sku":"BR1155","price":783.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1155-2-web_71689da7-1d61-4857-85dc-82d96b11d4c0.jpg?v=1749856451"},{"product_id":"brey-krause-r-1180-harness-bar-ford-mustang-s550","title":"Brey Krause R-1180 Harness Bar - Ford Mustang (S550)","description":"The Brey Krause Model R-1180 Harness Bar is designed for the 2015 and later S550-chassis Ford Mustang. The harness bar properly locates and supports racing shoulder harnesses relative to the driver and helps to protect the driver's shoulders and spine in the event of an accident. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Brey Krause bars are easy to install and remove, and will get you ready for the track in just a few hours! Includes clip-in mounting points for the lap belts.\u003cbr\u003e\u003cbr\u003e  Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration. The Brey-Krause Harness Mounts support the loads specified by the National Highway Traffic Safety Admin. DOT for upper torso restraints in all automobiles. Tensile tests performed by an independent lab.\u003cbr\u003e\u003cbr\u003e  \u003cspan style=\"color:red;\"\u003eNote:\u003c\/span\u003e Installation requires a small cut to be made on a replaceable interior panel. Replacement panels can be ordered from your Ford Dealer if you do not want to cut the original panels (Part Numbers FR3Z6331013AA \u0026amp; FR3Z6331012AA).","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942220563,"sku":"BR1180","price":748.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1180-2-web.jpg?v=1749856451"},{"product_id":"brey-krause-r-1025-truss-style-harness-bar-porsche-911-coupe-1974-98","title":"Brey Krause R-1025 Truss-Style Harness Bar - Porsche 911 Coupe 1974-98","description":"The Brey Krause R-1025 is a truss-style harness bar for all 1974-98 Porsche 911 models (Coupe only). In response to the many requests from Porsche drivers looking for a bar that would not only guide their driving harnesses, but allow them to be mounted directly to the bar, Brey Krause developed the Harness Truss. Strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh. The Harness Truss is precision water-jet machined for a perfect fit into Porsche factory mounting points. This type of machining is accurate and does not create heat-affected areas in the metal which could alter tensile strength.\u003cbr\u003e\u003cbr\u003e  The Harness Truss has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Taffic Safety Administration. \u003cbr\u003e\u003cbr\u003e  Can be combined with the Brey Krause B-Pillar system for greater structural rigidity in your Porsche 911.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942253331,"sku":"BR1025","price":800.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1025-2-web.jpg?v=1749856453"},{"product_id":"brey-krause-r-1045-truss-style-harness-bar-porsche-cayman-987","title":"Brey Krause R-1045 Truss-Style Harness Bar - Porsche Cayman (987)","description":"The Brey Krause Model R-1045 Harness Truss for the Porsche Cayman is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. The unit is made of aluminum and stainless steel for superior strength and support, yet it is lighter than tubular or steel bars. It has been tested and certified to meet NHTSA load requirements. The R-1045 is easy to install and remove, utilizing existing factory mounting points, and is designed to allow enough seat travel for tall drivers. The stainless steel mounting brackets can be left installed in the \"B\" pillars to easily remove and remount the bar in minutes. \u003cbr\u003e\u003cbr\u003e The lattice is precision water-jet machined. It has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Administration DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942286099,"sku":"BR1045","price":918.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1045-web.jpg?v=1749856454"},{"product_id":"brey-krause-r-1115-harness-bar-chevrolet-corvette-c5","title":"Brey Krause R-1115 Harness Bar - Chevrolet Corvette (C5)","description":"The Brey Krause Model R-1115 Harness Bar for the C5 Corvette properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Brey Krause bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.\u003cbr\u003e\u003cbr\u003e  Installs to factory mounting points in the B-Pillars. Support rods attach to outside, rear seat track mounting points.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942318867,"sku":"BR1115","price":623.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1115-web.jpg?v=1749856455"},{"product_id":"brey-krause-r-1120-harness-bar-chevrolet-corvette-c6","title":"Brey Krause R-1120 Harness Bar - Chevrolet Corvette (C6)","description":"The Brey Krause Model R-1120 Harness Bar for the C6 Corvette properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, and will get you ready for the track in just a few hours!\u003cbr\u003e\u003cbr\u003e  (span style=\"color:red;\"\u0026gt;Note: Because of mounting locations in the C6, the B-pillar plastic sail panel covers will require two holes to be drilled through them. Brey-Krause provides plastic plugs to cover the holes if the bar is ever removed. Sail panels replacements can be ordered from your GM Dealer (Part 15277640 for driver side, and 15277641 for passenger side) if the plastic plugs are not the desired solution. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942351635,"sku":"BR1120","price":1017.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1120_web.jpg?v=1749856455"},{"product_id":"brey-krause-r-1131-harness-bar-chevrolet-corvette-convertible-c8","title":"Brey Krause R-1131 Harness Bar - Chevrolet Corvette Convertible (C8)","description":"\u003cp\u003eThe Brey Krause Model R-1131 Harness Bar for the C8 Corvette properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, and will get you ready for the track in just a few hours!\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942548243,"sku":"BR1131","price":1017.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1130-1131-C8-Harness-Bar-web_e18efa3b-d051-476a-89ea-d1b8b192db4a.jpg?v=1749856456"},{"product_id":"brey-krause-r-1203-harness-bar-bmw-e92-coupe","title":"Brey Krause R-1203 Harness Bar - BMW E92 Coupe","description":"The Brey Krause R-1203 Harness Bar fits all E92 BMW Coupes, including M3 models, and properly locates and supports racing shoulder harnesses relative to the driver. The easy to install bar does not require modification to the car, and attaches to existing seat belt mounts and seat-track hardware. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Fabricated from Type 304, stainless steel and then powdercoated in durable black wrinkle-finish. The Brey Krause BMW harness mount bars are easy to install and remove, use only factory existing holes and mounting points, and will not damage the car in any way. After initial installation, the bar can be removed and reattached in about 15 minutes. This design allows enough seat travel for even the tallest drivers.\u003cbr\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942613779,"sku":"BR1203","price":912.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1203-web.jpg?v=1749856456"},{"product_id":"brey-krause-r-1029-harness-bar-porsche-996-997-cabriolet-bose-models","title":"Brey Krause R-1029 Harness Bar - Porsche 996\/997, Cabriolet \u0026 Bose Models","description":"The Brey Krause Model R-1029 Harness Bar for the Porsche 996 and 997 Cabriolet allows the mounting of racing harnesses directly to the bar (as opposed to using a Harness Guide Bar). The R-1029 also fits Porsche 996\/997 Coupes equipped with the Bose speaker option. The bar is easy to install and remove, making use of existing holes and mounting points, and requiring no modification of the car in any way. Made of Type 304, stainless steel and powder coated in durable black wrinkle-finish, the bar is designed to allow enough seat travel for tall drivers. \u003cbr\u003e\u003cbr\u003e    Fits all Porsche 996 and 997 Cabriolet and Bose-Speaker Optioned Coupes.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942679315,"sku":"BR1029","price":879.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1029-web.jpg?v=1749856456"},{"product_id":"brey-krause-r-1046-truss-style-harness-mount-porsche-cayman-981","title":"Brey Krause R-1046 Truss-Style Harness Mount - Porsche Cayman (981)","description":"The innovative Brey Krause R-1046 Harness Mounting solution for the 981 Porsche Cayman makes use of limited space for an installation that neither limits seat travel, nor produces too much of a harness angle. By utilizing the factory Porsche cross-member located directly behind the seats, the R-1046 Truss-style mount offers a proper harness angle and up to 1\" of height adjustment - all without restricting rearward seat travel. No structural modification is required - the simple install involves simply peeling back the carpeting and can be hidden when not in use. More avid track-day enthusiasts can pass the harness through the carpet (modification of carpet needed); dedicated race cars can even utilize this design to bypass a harness bar and create additional room for the seat.\u003cbr\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942712083,"sku":"BR1046","price":249.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1046-web_b7c77256-9d1f-475d-989b-462cc4bf955e.jpg?v=1749856467"},{"product_id":"brey-krause-r-1156-sta-harness-bar-chevrolet-camaro-6th-gen","title":"Brey Krause R-1156 STA Harness Bar - Chevrolet Camaro (6th Gen)","description":"\u003cp\u003eThe Brey Krause Model R-1156 Harness Bar fits the 2015 and later Chevrolet Camaro and is designed to be used with Brey Krause's R-9170 \u0026amp; R-9171 seat track adapters (not compatible with stock seats). The harness bar properly locates and supports racing shoulder harnesses relative to the driver and includes guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Easy to install and remove, the Brey Krause R-1156 Harness Bar uses existing holes and mounting points, and requires no vehicle modification. Kit includes everything needed for a proper 4\/5\/6-point harness set-up, while allowing enough seat travel for the tallest of drivers.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942777619,"sku":"BR1156","price":746.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1156-main-web.jpg?v=1749856493"},{"product_id":"brey-krause-r-1130-harness-bar-chevrolet-corvette-coupe-c8","title":"Brey Krause R-1130 Harness Bar - Chevrolet Corvette Coupe (C8)","description":"The Brey Krause Model R-1130 Harness Bar for the C8 Corvette properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. \u003cspan data-mce-fragment=\"1\"\u003eDue to the extremely limited space in the C8, a proprietary internal structure was added to reinforce the mandrel bent tubing. In addition, the thickness of the tubing was increased to create a harness mount that well exceeds all testing requirements for seat belt anchorages. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942875923,"sku":"BR1130","price":1017.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1130-1131-C8-Harness-Bar-web_26cd3112-e461-4dda-b6f9-1650ff5c6987.jpg?v=1749856466"},{"product_id":"brey-krause-r-1040-passenger-harness-mount-bar-porsche-gt3-cup","title":"Brey Krause R-1040 Passenger Harness Mount Bar - Porsche GT3 Cup","description":"\u003cp\u003eThe Brey Krause Model R-1040 Passenger Harness Mount Bar offers a convenient solution for Porsche GT3 Cup Car owners who are looking to add a passenger seat and harness. Tested to the same requirements of the National Highway Traffic Safety Administration, the harness mount bar properly locates and supports racing shoulder harnesses for the passenger. Constructed from lightweight aluminum, the harness bar comes in an attractive clear anodized finish and installs in minutes.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942810387,"sku":"BR1040","price":492.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1040-web_b4164b5a-f0fb-4f73-8821-425432f6fa20.jpg?v=1749856482"},{"product_id":"brey-krause-r-1204-harness-bar-bmw-e90-sedan","title":"Brey Krause R-1204 Harness Bar - BMW E90 Sedan","description":"The Brey Krause R-1204 Harness Bar fits all E90 BMW Sedans, including M3 models, and properly locates and supports racing shoulder harnesses relative to the driver. The easy to install bar does not require modification to the car, and attaches to existing seat belt mounts and seat-track hardware. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Fabricated from Type 304, stainless steel and then powdercoated in durable black wrinkle-finish. The Brey Krause BMW harness mount bars are easy to install and remove, use only factory existing holes and mounting points, and will not damage the car in any way. After initial installation, the bar can be removed and reattached in about 15 minutes. This design allows enough seat travel for even the tallest drivers.\u003cbr\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942941459,"sku":"BR1204","price":912.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1204-2_72b747dc-998a-4061-8e27-beee8805c8f0.jpg?v=1749856466"},{"product_id":"brey-krause-r-1110-harness-bar-chevrolet-corvette-c4","title":"Brey Krause R-1110 Harness Bar - Chevrolet Corvette (C4)","description":"The Brey Krause Model R-1110 Harness Bar for the C4 Chevrolet Corvette properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Brey Krause bars are easy to install and remove, use only factory existing holes and mounting points, and will not damage the car in any way. \u003cbr\u003e\u003cbr\u003e  Kit Includes Brey Krause outside lap belt mount attachments (R-9111). Inside lap belt mounts (R-9110) and anti-submarine bar (R-9130) are not included (available separately)\u003cbr\u003e\u003cbr\u003e  \u003cspan style=\"color:red;\"\u003eNote: \u003c\/span\u003eDoes not fit ZR1 models. A custom application is available from Brey krause - please contact us for details.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926942974227,"sku":"BR1110","price":800.78,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1110-web_1_a03aded2-685c-4489-ac59-c3aa075e2f53.jpg?v=1749856493"},{"product_id":"brey-krause-r-1035-truss-style-harness-bar-porsche-996-997-coupe","title":"Brey Krause R-1035 Truss-Style Harness Bar - Porsche 996\/997 Coupe","description":"The Brey Krause Model R-1035 is a truss-style harness mount for the Porsche 996 and 997 coupe. In response to the many requests from Porsche drivers looking for a bar that would not only guide their driving harnesses, but allow them to be mounted directly to the bar, Brey Krause developed the Harness Truss. Strong, yet it weighs only a fraction of what a support of the same strength made from tubular or bar steel would weigh. The Harness Truss is precision water-jet machined for a perfect fit into Porsche factory mounting points. This type of machining is accurate and does not create heat-affected areas in the metal which could alter tensile strength. Installs to the top of the rear strut tops, and seat belt mounting points for easy installation and removal. \u003cbr\u003e\u003cbr\u003e  The Harness Truss has been tested and certified to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Taffic Safety Administration. \u003cbr\u003e\u003cbr\u003e  \u003cspan style=\"color:red\"\u003eDoes not fit Cabriolet or models equipped with the Bose Premium Speakers.\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926943006995,"sku":"BR1035","price":1260.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/935-brey-krause-aluminum-harness-truss-for-porsche-996-coupe_4ffc5c76-8591-4d14-af5d-3e78e11438af.jpg?v=1749856466"},{"product_id":"brey-krause-r-1031-harness-bar-adapter-kit-porsche-996-gt2-and-gt3","title":"Brey Krause R-1031 Harness Bar Adapter Kit - Porsche 996 GT2 And GT3","description":"\u003cp\u003eThe Brey Krause Model R-1031 Adapter Kit allows the Brey Krause R-1030 and R-1035 Harness Bar\/Truss (for Porsche 996 Coupes) to be installed in Porsche 996 GT2 and GT3's. Simple bolt on adapter requires no modifications to the car or mount bar. The adapter kit replaces the forward support tubes included in the original kit, because these cars lack the rear-seat belt mounting points.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926943203603,"sku":"BR1031","price":236.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1031-2-web.jpg?v=1749856466"},{"product_id":"brey-krause-r-1036-harness-bar-upgrade-kit-truss-style-conversion","title":"Brey Krause R-1036 Harness Bar Upgrade Kit - Truss-Style Conversion","description":"\u003cp\u003eThe Brey Krause R-1036 Harness Bar Upgrade Kit converts an R-1030 Harness Bar (for Porsche 996 Coupe) to an R-1035 Truss-style Harness Bar. Includes all hardware neccesary for the conversion.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926943236371,"sku":"BR1036","price":472.59,"currency_code":"USD","in_stock":false}]},{"product_id":"brey-krause-r-1202-harness-bar-bmw-e46-coupe","title":"Brey Krause R-1202 Harness Bar - BMW E46 Coupe","description":"\u003cp\u003eThe Brey Krause R-1202 Harness Bar fits all E46 BMW Coupes, including the M3, and properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Fabricated from Type 304, stainless steel and then powdercoated in durable black wrinkle-finish. The Brey Krause BMW harness mount bars are easy to install and remove, use only factory existing holes and mounting points, and will not damage the car in any way. After initial installation, the bar can be removed and reattached in about 15 minutes. This design allows enough seat travel for even the tallest drivers.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926943498515,"sku":"BR1202","price":918.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1202-web_c185e212-cbed-4ae9-a251-05f4bbf4e340.jpg?v=1749856467"},{"product_id":"brey-krause-r-1150-harness-bar-chevrolet-camaro-5th-gen","title":"Brey Krause R-1150 Harness Bar - Chevrolet Camaro (5th Gen)","description":"The Brey Krause Model R-1150 Harness Bar for the 2010 and later Chevrolet Camaro properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Easy to install and remove, the Brey Krause R-1150 Harness Bar uses existing holes and mounting points, and requires no vehicle modification. Kit includes everything needed for a proper 4-point harness set-up, while allowing enough seat travel for the tallest of drivers.\u003cbr\u003e\u003cbr\u003e    \u003cspan style=\"color: red;\"\u003eNote: \u003c\/span\u003eIncludes the Brey Krause R-9150 Inner Lap Belt Mounting Kit.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926943596819,"sku":"BR1150","price":783.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1150.jpg?v=1749856468"},{"product_id":"brey-krause-r-1030-harness-bar-porsche-996-997-coupe","title":"Brey Krause R-1030 Harness Bar - Porsche 996\/997 Coupe","description":"The Brey Krause Model R-1030 Harness Bar for the Porsche 996\/997 Coupe not only guides the shoulder harnesses, but also allows them to be mounted directly to the bar. The bar is easy to install and remove, making use of existing holes and mounting points, and requiring no modification of the car in any way. Made of Type 304, stainless steel and powder coated in durable black wrinkle-finish, the bar is designed to allow enough seat travel for tall drivers. \u003cbr\u003e\u003cbr\u003e  \u003cspan style=\"color:red;\"\u003eNote: \u003c\/span\u003eThis bar does not fit 996 Coupes with the optional Bose rear deck mounted speakers. Models with this option must use the Brey Krause R-1029 Porsche 996 Cabriolet Harness Bar. Porsche 996 GT2 and GT3 models require the Brey Krause R-1031 Adapter Kit (available separately).","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926943629587,"sku":"BR1030","price":879.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1030-2-web.jpg?v=1749856468"},{"product_id":"brey-krause-r-1125-harness-bar-chevrolet-corvette-c7","title":"Brey Krause R-1125 Harness Bar - Chevrolet Corvette (C7)","description":"The Brey Krause Model R-1125 Harness Bar for the C7 Corvette properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, and will get you ready for the track in just a few hours!\u003cbr\u003e\u003cbr\u003e  \u003cspan style=\"color:red;\"\u003eNote:\u003c\/span\u003e Because of mounting locations in the C7, the B-Pillar plastic sail panel covers will require slot on either side to be cut. Sail panels replacements can be ordered from your GM Dealer if you do not want to cut the original panels (Part 23176134 for driver side, and part 23176135 for passenger side). Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926943826195,"sku":"BR1125","price":968.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/r-1125-web_7eebcf41-dd23-47c5-b6eb-56f1cc41ba8f.jpg?v=1749856490"},{"product_id":"brey-krause-r-1020-harness-guide-bar-porsche-924-944-968","title":"Brey Krause R-1020 Harness Guide Bar - Porsche 924, 944 \u0026 968","description":"The Brey Krause Model R-1020 Harness Guide Bar fits all Porsche 924, 944, \u0026amp; 968 cars. Brey Krause harness guide bars for the Porsche 924, 944, \u0026amp; 968 properly locates the racing shoulder harness relative to the driver. Harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. The Brey Krause harness guide bars are carefully engineered to transfer these forces to factory supplied points that are designed to take the load. Manufactured from type 304, stainless steel with a satin finish - superior materials and workmanship do the job while having an appearance worthy of a Porsche.\u003cbr\u003e\u003cbr\u003eNote: These are Guide Bars ONLY. DO NOT mount Harnesses directly to these pieces.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926943793427,"sku":"BR1020","price":557.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1693-brey-krause-guide-bar-for-porsche-924-944-968_a74d6dd5-b632-42f8-b43b-3f9a0db00991.jpg?v=1749856485"},{"product_id":"brey-krause-r-1103-harness-bar-ford-focus-st-rs-gen-3-4","title":"Brey Krause R-1103 Harness Bar - Ford Focus ST\/RS (Gen 3\/4)","description":"\u003cp\u003eThe Brey Krause R-1103 Harness Bar fits the 3rd and 4th Generation Ford Focus ST \u0026amp; RS, and properly locates and supports racing shoulder harnesses relative to the driver. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Fabricated from Type 304, stainless steel and then powdercoated in durable black wrinkle-finish. The Brey Krause harness mount bars are easy to install and remove, use only factory existing holes and mounting points, and will not damage the car in any way. After initial installation, the bar can be removed and reattached in about 15 minutes. This design allows enough seat travel for even the tallest drivers.\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926944022803,"sku":"BR1103","price":748.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1103-2.jpg?v=1749856487"},{"product_id":"brey-krause-r-1032-harness-bar-porsche-991-coupe","title":"Brey Krause R-1032 Harness Bar - Porsche 991 Coupe","description":"The Brey Krause Model R-1032 Harness Bar for the Porsche 991 Coupe not only guides the shoulder harnesses, but also allows them to be mounted directly to the bar. The bar is easy to install and remove, making use of existing holes and mounting points, and requiring no modification of the car in any way. Made of Type 304, stainless steel and powder coated in durable black wrinkle-finish, the bar is designed to allow enough seat travel for tall drivers.\u003cbr\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926944153875,"sku":"BR1032","price":879.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-1032-2.jpg?v=1749856488"},{"product_id":"brey-krause-camera-mount-porsche-with-r-1025-1045-harness-truss","title":"Brey Krause Camera Mount - Porsche With R-1025\/1045 Harness Truss","description":"The Brey Krause Model R-9016 Camera Mount fits the Brey Krause R-1025 (Porsche 911 1974-98) and R-1045 (Porsche Cayman) Harness Truss. Stainless steel camera mount is three-axis adjustable to properly position camera. Strap safely secures camera to mount. Holds one camera via a standard shoe. \u003cbr\u003e\u003cbr\u003eNote: This camera mount is designed to bolt directly to the Brey Krause R-1025 or R-1045 Harness Truss (available separately).","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926944252179,"sku":"BR9016","price":295.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/R-9016.jpg?v=1749856490"},{"product_id":"brey-krause-r-1015-harness-guide-bar-porsche-911-targa-74-98","title":"Brey Krause R-1015 Harness Guide Bar - Porsche 911 Targa 74-98","description":"The Brey Krause Model R-1015 Harness Guid Bar fits the 1974-1993 Porsche 911 Targa. Brey Krause harness guide bars for the Porsche 911 Targa properly locates the racing shoulder harness relative to the driver. Harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. The Brey Krause harness guide bars are carefully engineered to transfer these forces to factory supplied points that are designed to take the load. Manufactured from type 304, stainless steel with a satin finish - superior materials and workmanship do the job while having an appearance worthy of a Porsche.\u003cbr\u003e\u003cbr\u003eNote: These are Guide Bars ONLY. DO NOT mount Harnesses directly to these pieces.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926944284947,"sku":"BR1015","price":551.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1692-brey-krause-guide-bar-for-porsche-911-targa.jpg?v=1749856492"},{"product_id":"brey-krause-camera-mount-porsche-996-997-with-r-1035-harness-truss","title":"Brey Krause Camera Mount - Porsche 996\/997 With R-1035 Harness Truss","description":"The Brey Krause Model R-9014 Camera Mount fits the Brey Krause R-1035 Harness Truss for Porsche 996\/997. Stainless steel camera mount is three-axis adjustable to properly position camera. Strap safely secures camera to mount. Holds one camera via a standard shoe. \u003cbr\u003e\u003cbr\u003eNote: This camera mount is designed to bolt directly to the Brey Krause R-1035 Harness Truss (available separately).","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926944317715,"sku":"BR9014","price":295.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1371-brey-krause-camera-mount-1035-harness-truss-middle.jpg?v=1749856492"},{"product_id":"brey-krause-r-1010-harness-guide-bar-porsche-911-coupe-74-98","title":"Brey Krause R-1010 Harness Guide Bar - Porsche 911 Coupe 74-98","description":"The Brey Krause Models R-1010 Harness Guide Bar fits 1974-1998 Porsche 911 Coupes. Brey Krause harness guide bars properly locate a racing shoulder harness relative to the driver. Harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. The Brey Krause harness guide bars are carefully engineered to transfer these forces to factory supplied points that are designed to take the load. Manufactured from type 304, stainless steel with a satin finish - superior materials and workmanship do the job while having an appearance worthy of a Porsche.\u003cbr\u003e\u003cbr\u003eNote: These are Guide Bars ONLY. DO NOT mount Harnesses directly to these pieces.","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":51926944350483,"sku":"BR1010","price":420.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/1487\/4131\/files\/1691-brey-krause-guide-bar-for-porsche-911.jpg?v=1749856492"}],"url":"https:\/\/enzuca.com\/collections\/brey-krause-harness-mounts.oembed?page=3","provider":"Enzuca’s corner","version":"1.0","type":"link"}