Verus Engineering Dual Element Dive Plane Kit - Porsche 991.2 GT3 / GT3 RS - A0208A

These dual-element dive planes increase front-end downforce, raise the high-pressure airflow feeding the factory intake duct, and keep the drag increase minimal. CFD optimized, they let you tune aero balance forward without touching the rear of the car — which is what makes them the cheapest useful adjustment in an aero package.

Features

• CFD optimized dual-element design
• Shifts aero balance forward to improve front-end grip
• Increases high-pressure airflow to the factory intake duct
• Fine-tune balance without modifying rear aero
• Installs bolt-on or with double-sided tape using the included templates

Specifications

• Material: 2x2 weave carbon fiber, autoclave cured, 1.5mm
• Finish: UV-resistant automotive-grade clear coat, gloss or matte
• Mounting: 3M VHB double-sided tape
• Hardware: Stainless steel throughout

What's Included

• Upper and lower left dive planes
• Upper and lower right dive planes
• Install template
• (4) Pieces of 3M VHB tape

Fitment

Porsche 991.2 GT3 and 991.2 GT3 RS. The 991.1 cars use a different kit (A0238A).

Choosing a finish

Gloss is the polished, high-shine clear coat that matches most factory carbon trim. Matte is a flatter satin finish that pairs better with PPF and matte wraps. The aerodynamics are identical.