Verus Engineering V1X Carbon Swan Neck Rear Wing Kit - Porsche 991 GT3 RS / GT2 RS - A0230A

Dramatically improve rear-end grip at speed with a 300mm chord swan neck wing. Swan neck mounting hangs the element from above, leaving the low-pressure underside undisturbed — that surface generates most of the downforce, so keeping it clean means more load for the same drag. Developed in CFD and validated in the wind tunnel, with no permanent chassis modification required.

Features

• CFD-optimized airfoil, wind tunnel validated
• Generates over 700 lbs of downforce at 120 mph
• 15 adjustment angles, from -1 to 14 degrees
• Complete wing weighs under 9 lbs
• Bolt-on installation with zero permanent modification
• Includes a chassis brace to carry the downforce loads

Specifications

• Wing: 2x2 twill 3k pre-preg carbon fiber, autoclave cured
• Structure: Carbon inner ribs and carbon endplates
• Uprights and brackets: Machined 6061-T6 aluminum
• Hardware: Military-spec throughout

What's Included

• Carbon rear wing
• (2) Carbon vented endplates
• (2) Machined swan neck uprights
• (2) Chassis mount brackets
• (2) Delrin chassis stops
• Gurney flap and 3M VHB tape
• Complete hardware kit

Fitment

Porsche 991.1 and 991.2 GT3 RS and GT2 RS