Pagid RS19 (RSL 19) on Track: The Endurance Yellow and the Rear Axle
RS19 is the original Pagid Yellow, the compound with the endurance-race history, and RS29 is its close relative: Pagid describes RS29 as having the RS19's wear rate with a little more friction and initial bite. Owners mostly treat the two as interchangeable. Pagid now lists it as RSL 19 and gives it a clearer job than it used to have: the rear pad behind RSL1 fronts on heavier GT cars, and a front pad on lighter ones.
This article is part of our guide to Pagid pads for track cars. Every shape we list is in the RS19 collection.
What Pagid says
| RS19 / RSL 19 | |
|---|---|
| Family | RSL — endurance racing (Yellow) |
| Friction | "Medium friction coefficient"; "stable in-stop friction" |
| Life | "Very disc friendly and long pad life" |
| Intended use | "Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars." |
Pagid's endurance record for the Yellow is long — dealers cite wins at Daytona, Le Mans, Sebring, Spa and the Nürburgring 24 Hours. Pagid publishes no operating range.
RS19 or RS29?
Owners and dealers describe them as close cousins. "Rs19 and rs29 are essentially the same (Pagid yellow)," one Rennlist poster wrote. A Porsche parts vendor gave the detail: "19 & 29 are VERY similar. The 29 will have a bit higher coefficient of friction. The 19 has a bit better release characteristics." BimmerWorld agrees that RS29 has "slightly higher friction coefficient and initial bite." A 997 owner found the same in use: "I have found RS29 Yellows to have more initial bite than the RS19 version."
One common misconception is that RS19 is the sprint pad and RS29 the endurance pad. Pagid puts both in its endurance family. If you are choosing between them for track days, RS29 is the more common choice and the bigger range; RS19 is the one to pick when you want slightly smoother release, or Pagid's own rear pairing for RSL1.
The rear axle behind RSL1 or RS29
Pagid's own pairing for heavier GT cars is RSL1 at the front with RSL 19 at the rear. On Porsche GT3s, owners have long run the Yellows split the other way: "I am on Pagid 29 F, 19 R (maybe 14)," one 996 GT3 owner wrote. Either way the idea is a slightly calmer, very disc-friendly pad on the rear. Like any Pagid split, keep the setup square until you know why you want to change it.
Which cars run it
| Car | How it's run | Our RS19 pads |
|---|---|---|
| Porsche 996 / 997 GT3, GT2, Turbo, Carrera GT | RS29 front, RS19 rear on GT3s; or square. | Front U2707 |
| Porsche 986 / 987 S, Cayman S, 996 / 997 Carrera | Square, as an alternative to RS29. | Front / rear U2405 |
| Porsche 964 / 993 / 944 / 968 / 928 | "many of use use yellow RS19 or 29 for dual use" (964 forum, 2011). | U1203 |
| Camaro SS, C7 Stingray, Boss 302, Evo, STI, CTS-V | Little owner data. | Front U2487 |
| BMW E9x 335i, Evo X, Audi RS4 / S4 | Little owner data. | 335i rear U8051 · Evo X rear U8069 · RS4 / S4 rear U8039 |
RS19 pads ready to ship
Browse every shape in the RS19 collection.
The Bottom Line
RS19 and RS29 are nearly the same pad. For general track days, RS29 is the default; choose RS19 when you want slightly smoother release, or as the rear pad behind RSL1 on a heavier GT car, which is how Pagid itself pairs them.
Not sure of your shape? Tell us the car and caliper and we will confirm before you order.
Related guides
- Pagid brake pads for track cars: which compound, car by car
- Pagid RS29 / RSL29 on track, car by car
- Pagid RSL1: the step up from RS29
- Pagid RST3: front or rear
- Pagid RS14 Black: bite, and the rear-pad split
- Pagid RSC1 for carbon-ceramic rotors
- Best Pagid brake pads compared
- PFC brake pads for track cars, car by car
- Hawk brake pads for track cars, car by car
- Track day brake fade: prevention and recovery
Every RS19 shape we stock, front and rear.
Shop Pagid RS19 pads Back to the Pagid guide, car by car ›


