Pagid Brake Pads for Track Cars: Which Compound Owners Run, Car by Car
At a Porsche Club track day, a good share of the cars in the paddock will be on Pagid Yellows. The RS29 has been the default endurance-and-HPDE pad on Porsches for a long time — one Porsche vendor says Pagid "seems to be the preferred choice of most PCA front runners" in Spec Boxster — and the stock pads on a GT4 are Pagid-made. It is not only a Porsche pad, though. BMW, Camaro and Mustang owners run it too, and the reasons are the same: long pad life, easy modulation and kind treatment of rotors.
This guide is for track cars only. It is built around what owners actually run, read from the forums where they argue about it — Rennlist, 911uk, 6speedonline, the 718 forum, f80.bimmerpost, camaro5 and camaro6, mustang6g and trackmustangsonline, and Grassroots Motorsports — checked against Pagid's own literature. Each main compound has its own deeper article. If you want Pagid's descriptions side by side, start with the Pagid compounds compared.
First, the names have changed
Pagid has reorganised its compounds into families, and some familiar names have moved. The pad everyone calls RS29 is now listed by Pagid as RSL 29, and RS19 as RSL 19, in the RSL endurance family. Dealers and owners still use the old names, and so do our product listings; they are the same Yellow compound. The other families are RS (all-round racing: RS14 Black, RS42 Blue, RS44 Orange), RST (rally, sprint and stock car: RST1 to RST4) and RSC (for carbon-ceramic rotors).
The pad shape is a separate number. Every Pagid pad carries a U-number — U2405, U4924 — which is the shape, not the car. One shape covers every car with that caliper, which is why the same number shows up on a 997 and a Cayman S.
One more caution: Northstar Motorsports, which describes itself as Pagid's largest US distributor, now says RS14, RS42 and RS44 are discontinued, with limited stock left, and suggests RST3, RSL19 and RSL29 respectively. Pagid's own 2026 catalogue still lists all three. We still have some in stock; if you are building a long-term setup around one of them, plan for the replacement.
Quick picks
- First Pagid, any car we list — RS29 / RSL 29 at both ends. Long life, easy rotors, "easy bedding" in Pagid's words.
- You want more bite than RS29 without giving up life — RSL1, front or both ends.
- Mid- or rear-engine Porsche, more rotation — RS29 front with a more aggressive rear: RS14 or RST3. The Spec Boxster favourite.
- Heavier front-engine car on R-compound tires — RST3 at the front; owners on the Boss 302 and GT350 report noticeably more stopping power than RS29.
- Long stints, or the rear pad behind RSL1 on a GT car — RS19 / RSL 19.
- Carbon-ceramic rotors (PCCB, BMW CCB) — RSC1, and nothing else on this list.
The compounds side by side
Friction labels are Pagid's own wording. Pagid publishes friction-versus-temperature curves but not operating ranges for most compounds, so we have not invented any.
| Compound | Family | Pagid's friction label | What owners use it for |
|---|---|---|---|
| RS29 / RSL 29 | RSL (endurance), Yellow | Medium friction; long pad and disc life; easy bedding | The default HPDE and club pad, square front and rear |
| RS19 / RSL 19 | RSL (endurance), Yellow | Medium friction; stable in-stop friction; very disc friendly | Long stints; rear pad behind RSL1 on GT cars |
| RSL1 | RSL (endurance) | High friction; long pad and disc life; good stability vs temperature | The step up from RS29 |
| RST3 | RST (rally / sprint) | Medium-high friction; good initial bite; excellent modulation and release | More bite on heavy cars; aggressive rear on Porsches |
| RS14 | RS (all-round), Black | Medium-high friction; good initial bite; fade resistant | Rear behind RS29 on Porsches; more bite square |
| RSC1 | RSC (ceramic discs) | Medium friction; disc friendly | Track days on factory carbon-ceramic rotors |
The ladder, in one paragraph each
RS29 / RSL 29
Pagid's own description is "medium friction coefficient, long pad and disc life, easy bedding," and that is how owners describe it too. A dealer on Rennlist said "RS29 front and rear is our most common sale." It has less initial bite than a PFC: an M3 owner on f80.bimmerpost found "the RS29 have less initial bite than the PF08 I used to run." In return it is easy on rotors and lasts. Go deeper on RS29 →
RSL1
Higher friction than RS29, in the same endurance family, and the usual answer when someone asks for more bite from a Pagid. "If you want more bite than the Pagid RS29, the new RSL1 compound will be the ticket," a vendor wrote in a GT4 thread. An M4 owner said that after three days at Mont-Tremblant "they were only 50% worn...pretty amazing." It is also louder on the street. Go deeper on RSL1 →
RST3
A medium-high-friction race compound from Pagid's rally and sprint family, with good bite and release that one dealer says makes it "ideal for use with ABS systems." Pagid does not sell it as a street pad. A Boss 302 owner found "the RST-3 pads allow you to brake significantly harder than the RS-29 given equal pedal pressure." Go deeper on RST3 →
RS14 (Black)
More aggressive than the Yellows, and harder on rotors. "I prefer the Blacks; tremendous stopping power, zero fade for me, excellent modulation," a 997 owner wrote, "harder for sure on rotors, but the performance is worth the extra rotor wear." Its most common job on Porsches is the rear axle behind RS29 fronts. Go deeper on RS14 →
RS19 / RSL 19
The other Yellow. Owners treat it as almost the same pad as RS29 — a vendor put it as "19 & 29 are VERY similar," with RS29 a little higher in friction and RS19 a little better in release. Pagid now positions it as the rear partner for RSL1 fronts on heavier GT cars. Go deeper on RS19 →
RSC1
Pagid's track-day compound for carbon-ceramic rotors. Owners on 991 GT3s with PCCB call it the pad to use: "I understand that Pagid RSC1 are the go to pads for PCCB's." It is milder than OEM and trades some pad life for rotor life. Go deeper on RSC1 →
What people run, car by car
This is the community picture, not Pagid's. Where owners disagree we say so, and where there is little data we say that too. The last column links the Pagid shapes we list for that car, by U-number. Shapes are shared across cars, so confirm yours before you order.
| Car | Getting started | Intermediate | Advanced / race | Our pads |
|---|---|---|---|---|
| Porsche 986 / 987 Boxster & Cayman | RS29 square | RS29 front, RS14 or RST3 rear (the Spec Boxster favourite) | RSL1 front and rear | Base front U2407 · S front U2405 Rear U2406 (RS29) / U2406 (RST3) / U2406 (RSL1) |
| Porsche 981 Boxster S / Cayman S | RS29 | Little data | — | Front U8074 / U8074 (RST3) · rear U2406 |
| Porsche 996 / 997 Carrera & S | RS29 square | RS29 front, RS14 or RST3 rear for more rear bias | RSL1 front, RS29 or RS19 rear | 997 Carrera front U2405 · Carrera S front U2474 997 rear U8006 / U8008 996 3.4 / 3.6 rear U2406 |
| Porsche 996 / 997 GT3 & GT3 RS | RS29 square — "more than enough for track days" | RS29 front, RS19 rear (the long-time GT3 split) | RSL1 front | Front U2707 / U2707 (RS19) 997 rear U8006 · 996 rear U2405 |
| Porsche 981 / 718 GT4, 991 / 992 GT3 (iron) | Stock pads (Pagid-made) or RSL 29 | RSL 29 square | RSL1 front, RS29 rear | Front U4924 / U4924 (RSL1) Rear U4925 / U4925 (RSL1) |
| Porsche 991 / 992 / 718 GT cars with PCCB | RSC1 | RSC1 | RSC2 / RSC3 (racing) | Front U4927 · rear U4925 |
| Porsche 964 / 993 | RS29, often as a dual-use pad (older threads) | RS29 square | RS14 or RSL1 | 993 front U1204 · 964 / 993 rear U1203 Turbo / RS front U1842 |
| Porsche 944 / 968 | RS29 or RS42 (older threads) | RS14 | — | Shapes U1203 / U1204 944 / 924 / 928 rear U4623 (RS44) |
| Classic 911 (to 1989) | Little data | — | — | Front U4501 · rear U4304 |
| BMW E36 / E46 M3 | RS29 square; BimmerWorld: "Never upgrade one axle and not the other" | Little owner data | — | Front U1295 E36 M3 rear U1285 · E46 M3 rear U2685 |
| BMW F80 M3 / F82 M4 (iron) | RS29 | RSL1 | RSL1 or RST | Front U4931 · rear U4933 / U4933 (RSL1) |
| Chevrolet Camaro SS (5th gen) | RS29 — "made a big difference in track manners" (GRM) | Little data | — | Front U2487 · rear U1408 |
| Corvette C7 Stingray / Z51 | RS29 | Little owner data | — | Front U2487 · rear U8208 |
| Mustang S197 GT Brembo / Boss 302 | RS29 | RST2 or RST3 front | — | Front U2487 / U2487 (RST2) |
| Mustang GT350 / S550 GT Performance Pack | RSL 29 | RSL 29 front, RST3 rear (dealer advice on the GT350) | — | GT350 front U8239 GT PP front U8203 · rear U8204 |
| Miata | Little Pagid data | — | — | NA / NB 1.8 front U8127 · NC / ND rear U8077 ND Brembo front U8023 |
| Evo, WRX STI, GT-R, CTS-V | Little data | — | — | Evo VIII–IX / STI / CTS-V front U2487 R35 GT-R / Camaro ZL1 / C7 Z06 (iron) front U8081 |
Pagid versus PFC, in owners' words
Most owners who have run both describe the same trade. PFC has more initial bite and lasts at least as long; Pagid runs cooler and is easier on rotors. "PFC 08 will definitely outlast Pagid and has more initial bite," one Rennlist poster wrote, while another said "PFC runs hot on the rotors where RS29 runs cooler and is friendlier to the rotors." A vendor in a GT4 thread put it as: the PFC11 "certainly has higher initial bite than the Pagid RS29," while "the Pagid is a touch easier on rotors than the PFC11 is." Not everyone agrees — a 997 owner on 911uk found RSL29 stopping power "similar to the PFC if not slightly better." Our PFC guide covers the other side.
Split friction: which way round
On mid- and rear-engine Porsches the common split is the opposite of a front-engine car: a more aggressive pad at the rear, to use the rear brakes more and help the car rotate. The Spec Boxster favourite is RS29 front with RS14 rear — "The most popular combination we sell for the SPB crowd," according to one Porsche parts vendor — and some run RST3 at the rear instead. On GT3s, RS29 front with RS19 rear has been common for years.
Front-engine cars go the other way. Pagid itself names RS44 and RST4 as rear pads "for all front engine cars", and its own pairings put the calmer pad at the back — RSL19 behind RSL1, RST2 behind RST1. BimmerWorld's advice for BMWs is blunt: "Front and rear brake compounds should be closely matched to maintain brake balance. Never upgrade one axle and not the other."
If you are new, run the same compound at both ends. As one Rennlist poster put it: "DE like square and ill advised to mix bias on fast tracks unless you've changed brake hardware."
What they cost you besides money
Noise. The biggest complaint, and the most inconsistent. A 993 owner said his Yellows "squeal like a school bus' worth of schoolgirls"; a GT350 owner said his "wail like a banshee." Others report none at all: a 997 GT3 owner wrote "And they don't squeal," and a Boss 302 and GT350 owner said they "didn't make any noise on the street". Two things seem to decide it. Pagid race pads do not come with the shims and clips that factory pads use, so fitting anti-squeal hardware helps. And the transfer layer: a 991 owner explained that once the track layer is on the discs "they do not squeak at all," until street miles wear it away.
Cold bite. RS29 has the best cold friction of Pagid's race pads, but it is still a race pad. An F80 owner described "a bit of a delay when they begin to bite"; another noted that "if they cool down to 200-300c, the initial bite will feel a bit diminished until they heat up above 400c." A Camaro 1LE owner found them "just fine at lower temps on the street, which is not the case for a lot of track pads."
Pad depth. Several owners say Pagids work best above half thickness. "Pagid will no longer stop the car when you get down to less than 1/2 the pad," one wrote; others run them lower. One Rennlist poster's rule of thumb: "5mm absolute min.. illl change at 6mm."
Bedding and switching compounds
Pagid's procedure for its race pads has three stages: ten bedding stops at mid pressure from about 90 mph to 50 mph; five heating stops at medium to high pressure from about 112 mph to 40 mph, accelerating hard between them; then three to five recovery stops like the first set. Pagid also says to avoid fitting new discs and new pads at the same time, and that "if the brake disc has been used before, please make sure that the brake pad compound is compatible with the friction layer on the disc." Changing compound on the same discs is one of the causes of judder that Pagid names.
Do not hold the pedal at a stop when the brakes are hot — Pagid says that is what imprints pad material on the disc. Fresh fluid matters as much as pads: see why we change brake fluid after every track day.
Two things Pagid race pads will not do
Carbon-ceramic rotors. Every Pagid compound except the RSC family is for iron rotors. A dealer puts it as "Race compounds designed for iron discs should not be used on ceramic composite discs, no exceptions." Some vendors report running RSL pads on aftermarket ceramic discs; we would follow Pagid and use RSC1, or convert to iron for heavy track use.
Be a street pad. Pagid sells a separate street line, Street+. The racing compounds here can be driven to the track — plenty of owners do it with RS29 — but expect noise and dust, and swap if the car is mainly a road car.
The rest of the range
- RS44 (Orange) — medium friction, "excellent modulation", and in Pagid's words a "very good rear axle pad for all front engine cars." We stock it for several older Porsche shapes. Northstar says it is being discontinued in favour of RSL29.
- RS42 (Blue) — good cold friction and the quietest Pagid on the road, by owners' accounts, but it wears quickly on track: "I initially looked like Pagid Blues but they wear too quickly on the track." Northstar says it is being replaced by RSL19.
- RST1, RST2, RST4 — the rest of the rally and sprint family. RST1 is very high friction, for heavy cars and small rotors; RST2 is Pagid's rear partner for it, and a Boss 302 owner found RST2 had "more stopping power than the 08's"; RST4 is a rear pad for front-engine cars.
Pads we have ready to ship
These were in stock when we wrote this and fit cars from the table above.
Or browse by compound: RS29, RSL1, RST3, RS14, RS19, RS44, RSC1, or the full Pagid range.
The Bottom Line
For most track cars the Pagid answer is RS29 / RSL 29, at both ends: long life, easy on rotors, predictable. Step up to RSL1 when you want more bite, put RS14 or RST3 at the rear of a mid- or rear-engine Porsche only when you know you want more rotation, and use RSC1 if your car has carbon-ceramic rotors. Expect less initial bite than a PFC, and fit anti-squeal hardware if the car sees the street.
If you are not sure which shape your car takes, read the U-number off your old pads or the box, or tell us the car, the caliper and what you do with it, and we will confirm before you order.
Related guides
- Pagid RS29 / RSL29 on track, car by car
- Pagid RSL1: the step up from RS29
- Pagid RST3: front or rear
- Pagid RS14 Black: bite, and the rear-pad split
- Pagid RS19 / RSL19: endurance and the rear axle
- Pagid RSC1 for carbon-ceramic rotors
- Best Pagid brake pads compared
- PFC brake pads for track cars, car by car
- Hawk brake pads for track cars, car by car
- Track day brake fade: prevention and recovery
Every Pagid compound and shape we stock.
Shop Pagid pads Compare every Pagid compound side by side ›





